Safety journey to reach crane truck\'s zero-incident performance

Here are some points for attention while doing the maintenance work of your crane truck. You should always observe and follow all safety precautions and use the proper tools when performing any maintenance procedures of your machine.

The first step is checking. Observe and understand these points to ensure the safety: Read and understand the Safety section of this manual, including the Lockout/Tag out procedure before proceeding with any inspection or maintenance procedures. Do not perform any maintenance that is not authorized in this operator's manual maintenance section for the crane truck. If unauthorized maintenance on your crane truck must be done, contact your SANY distributor before proceeding.

Secondly, avoid working on the crane truck while the engine is running unless required to do so in the procedure. If the engine must remain running during a procedure, always have a person in the cabin that can correctly operate the crane truck and who is in clear contact with you at all times. Contact your SANY distributor if you are unable to perform the procedures listed in this manual or if additional procedures are required.

Always use the proper tools when performing any maintenance procedures. Obtain the maintenance record for this machine before proceeding with any repair.

Always use the maintenance record for your crane truck to keep a daily record of the hour meter reading, and then refer to it when determining your schedule of maintenance procedures. Always use genuine SANY parts, coolants and lubricants when maintaining this machine. Failure to do so may result in premature system or component failure.

Always use clean "EP" (extreme pressure) grease when lubricating the crane truck. Avoid using low viscosity greases. If any access covers must be open when working on this machine, be sure those covers are properly supported.